Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper.
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: Diameter and length is after pressing. Below you can find the manufacturer's product data sheet for guidance on dimension selection.
Select a row from the table below, then click the add to quote button
Код продукции Diameter
mm
Size Length
mm
CAD
10.01TCU01 3 1 6,5
10.01TCU02 3,8 1,5 8
10.01TCU03 4 2 9
10.01TCU04 5 2,5 12
10.01TCU05 6 3 14
10.01TCU06 7 3,5 16
10.01TCU07 8 4 18
10.01TCU08 9 4,5 20
10.01TCU09 10 5 23
10.01TCU10 12 6 27
10.01TCU11 13 6,5 29
10.01TCU12 14 7 32
10.01TCU13 16 8 36
10.01TCU14 18 9 40
10.01TCU16 20 10 45
10.01TCU18 22 11 50
10.01TCU20 24 12 54

Diameter is after pressing.
Length is after pressing.

Download CAD

Description

Get CAD
скачать

info / downloads