The aluminium ferrule K (Konit™) are made from a special designed profile. The K ferrule has been validated according to TALURIT™ splicing system requirements. The ferrule are produced from seamfree extrucions which are extruded seamlessly over mandrel and the aluminium alloy is EN AW-5051A according to EN 573-3.

The K ferrule can be used in basic applications, with bright or galvanized single layer steel wire ropes with round strands up to fill factor 0,60 and grade 1960. The types of rope lay shall be Ordinary or Lang lay. For fibre core wire ropes larger than 60 mm the maximum rope grade is 1770. Wire ropes shall conform to EN 12385-4 and 5.

The K ferrule become smaller in diameter after pressing than the T-ferrule. For economic reasons.

  • Material: Aluminum
  • Marking: According to standard
  • Standard: EN 13411-3
Select a row from the table below, then click the add to quote button
Part Code Diameter
10.01TK09 16
10.01TK10 18
10.01TK11 20
10.01TK12 22
10.01TK13 24
10.01TK14 26
10.01TK16 28
10.01TK18 32
10.01TK20 36
10.01TK22 40
Diameter is after pressing.

Download CAD