• Material : drop forged high tensile steel SAE 1035 or 1045
• Safety factor : MBL equals 5 x WLL
• Standard : generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b
• Finish : hot dipped galvanized
• Certification : a works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request
• Note : jaw ends up to and including 5/8” are fitted with bolts and nuts, sizes 3/4” and up
are equipped with pins and cotters.
  • Ohutustegur: 5 fois la C.M.U.= charge de rupture minimale
Vali allolevast tabelist sobivaim rida, seejärel lisa toode päringule
WLL Diameter Thread a inch take up inch Length closed position b (mm) Length open position c (mm) opening jaw d (mm) length inside jaw e (mm) diameter pin jaw f (mm) thickness eye jaw g (mm) diameter eye jaw h (mm) diameter eye i (mm) width inside eye j (mm) length inside eye k (mm) Length closed position l (mm) Kaal
kg
CAD
0,54 3/8 6 283 418 12 21 8 9 21 10 13 29 49 0,52
1 1/2 6 315 446 16 26 10 11 25 12 18 36 58 0,88
1 1/2 9 390 598 16 26 10 11 25 12 18 36 57 1,13
1 1/2 12 466 751 16 26 10 11 25 12 18 36 57 1,37
1,59 5/8 6 363 486 18 32 13 14 33 14 21 45 79 1,55
1,59 5/8 9 438 639 18 32 13 14 33 14 21 45 78 1,84
1,59 5/8 12 514 790 18 32 13 14 33 14 21 45 78 2,17
2,36 3/4 6 391 510 24 38 16 16 41 17 26 54 89 2,28
2,36 3/4 9 467 663 24 38 16 16 41 17 26 54 89 2,82
2,36 3/4 12 542 815 24 38 16 16 41 17 26 54 88 2,95
2,36 3/4 18 694 1 120 24 38 16 16 41 17 26 54 89 3,3
3,27 7/8 12 583 848 27 42 19 19 48 20 32 61 101 4,35
3,27 7/8 18 735 1 153 27 42 19 19 48 20 32 61 101 5,46
4,5 1 24 928 1 494 31 50 22 20 54 24 37 76 116 8,35
4,54 1 6 473 579 31 50 22 20 54 24 37 76 118 4,66
4,54 1 12 624 884 31 50 22 20 54 24 37 76 117 5,94
4,54 1 18 776 1 190 31 50 22 20 54 24 37 76 117 7,98
6,9 1 1/4 12 677 950 44 71 29 26 68 29 47 91 145 10,4
6,9 1 1/4 18 833 1 258 44 71 29 26 68 29 47 91 144 11
6,9 1 1/4 24 989 1 566 44 71 29 26 68 29 47 91 144 12,9
9,71 1 1/2 12 716 983 52 71 35 28 80 32 55 106 156 13,1
9,71 1 1/2 18 871 1 290 52 71 35 28 80 32 55 106 160 14,7
9,71 1 1/2 24 1 023 1 594 52 71 35 28 80 32 55 106 158 17,8
12,7 1 3/4 18 979 1 356 60 86 41 33 90 38 61 120 197 22,3
12,7 1 3/4 24 1 130 1 662 60 86 41 33 90 38 61 120 196 27,5
16,8 2 24 1 208 1 728 63 93 51 40 107 46 69 147 230 42,9
27,2 2 1/2 24 1 343 1 899 75 114 57 41 143 51 80 165 274 68
34 2 3/4 24 1 399 1 953 90 110 70 41 158 57 84 178 284 91

CAD fail

CAD faili alla laadimiseks palun valige vastav toode ülalolevast tabelist ning vajutage "Laadi CAD" nupule. Peale CAD faili laadimist saate selle alla laadida.

Laadi CAD
Laadi alla