The aluminium ferrule K (Konit™) are made from a special designed profile. The K ferrule has been validated according to TALURIT™ splicing system requirements. The ferrule are produced from seamfree extrucions which are extruded seamlessly over mandrel and the aluminium alloy is EN AW-5051A according to EN 573-3.

The K ferrule can be used in basic applications, with bright or galvanized single layer steel wire ropes with round strands up to fill factor 0,60 and grade 1960. The types of rope lay shall be Ordinary or Lang lay. For fibre core wire ropes larger than 60 mm the maximum rope grade is 1770. Wire ropes shall conform to EN 12385-4 and 5.

  • Material: Aluminum
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: Diameter and length is after pressing.See the manufacturer's product data sheet below for guidance on dimension selection. The K ferrule become smaller in diameter after pressing than the T-ferrule. For economic reasons.
Select a row from the table below, then click the add to quote button
Part Code Diameter
Size Length
10.01TK09 16 9 36
10.01TK10 18 10 41
10.01TK11 20 11 45
10.01TK12 22 12 50
10.01TK13 24 13 55
10.01TK14 26 14 59
10.01TK16 28 16 64
10.01TK18 32 18 73
10.01TK20 36 20 82
10.01TK22 40 22 91
Diameter is after pressing.
Length is after pressing.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.


info / downloads