Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper.
  • Marking: According to standard
  • Standard: EN 13411-3
    sizes: 1, 1.5, 2, 42, 46, 50, 54, and 58 are not included in the EN 13411-3
  • Note: Diameter and length is after pressing. Below you can find the manufacturer's product data sheet for guidance on dimension selection.
TCU
Select a row from the table below, then click the add to cart button
Part Code Diameter
mm
Size Length
mm
CAD
10.02TCU01 3 1 6,5
10.02TCU02 3,8 1,5 8
10.02TCU03 4 2 9
10.02TCU04 5 2,5 12
10.02TCU05 6 3 14
10.02TCU06 7 3,5 16
10.02TCU07 8 4 18
10.02TCU08 9 4,5 20
10.02TCU09 10 5 23
10.02TCU10 12 6 27
10.02TCU11 13 6,5 29
10.02TCU12 14 7 32
10.02TCU13 16 8 36
10.02TCU14 18 9 40
10.02TCU16 20 10 45
10.02TCU18 22 11 50
10.02TCU20 24 12 54

Diameter is after pressing.
Length is after pressing.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download

info / downloads