Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper (almost 99,9%)
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: See the manufacturer's product data sheet below for guidance on dimension selection.
TCU
Select a row from the table below, then click the add to cart button
Part Code Ferrule size
mm
Length
mm
10.02TCU01 1 6,5
10.02TCU015 1,5 8
10.02TCU02 2 9
10.02TCU025 2,5 12
10.02TCU03 3 14
10.02TCU035 3,5 16
10.02TCU04 4 18
10.02TCU045 4,5 20
10.02TCU05 5 23
10.02TCU06 6 27
10.02TCU08 8 36
10.02TCU09 9 40
10.02TCU11 11 50
10.02TCU12 12 54
10.02TCU13 13 59
10.02TCU14 14 63
10.02TCU16 16 72
10.02TCU18 18 81

Diameter after pressing, see instruction.
Length is after pressing.

info / downloads