Universal clamp for lifting of a large variety of different shaped steel, ranging from steel plates and structured steel to curved and spherical shaped steels.
This omni-directional clamp can lift, hang, turn over, and pull steel structures.
This clamp is equipped with a screw cam(spherical universal designed), which provides an extra powerful clamping force on the work piece at no load and even when vibrations occur during operation.
When the clamp is under a load, the cam will tilt in accordance with the weight of the load. This tilting of the cam will increase the clamping force and cause the teeth of the cam and pad to bite harder into the work piece.

  • Material: Special alloy steel
  • Marking: CE-marked, Type, serial number, WLL, Jaw opening.
  • Temperature range: -20°C up to +150°C
  • Note: Tighten the screw to the sufficient values (over 5 N m for SCC 0.3W and SCC 0.5 and over 35 N m for SCC 1 to SCC 6)
  • Safety factor: 5:1
Select a row from the table below, then click the add to cart button
Part Code WLL
ton
Jaw width
mm
b
mm
d1
mm
d2
mm
h1
mm
h2
mm
h3
mm
H
mm
L min.
mm
l1
mm
l2
mm
l3
mm
T
mm
S
mm
Weight
kg
CAD
16.01SCC0.3W 0,3 50-100 17 26 10 91 16 35 155 196 176 116 75 32 14 1,3
16.01SCC0.5 0,5 0-28 17 26 10 76 16 26,5 113 123 104 89 60 30 14 0,8
16.01SCC1 1 0-30 38 42 12 128 38 45 204 175 148 126 190 46 21 3,2
16.01SCC1W 1 50-100 45 42 16 190 38 88 273 258 225 153 190 46 21 6
16.01SCC1.5 1,5 0-32 45 42 16 143 39 52 229 187 154 135 190 46 21 4
16.01SCC3 3 0-50 50 49 19 165 45 60 265 224 190 165 240 54 21 6
16.01SCC3W 3 25-75 50 49 19 191 45 76 291 250 215 165 240 54 21 7,8
16.01SCC6 6 0-75 80 63 31,5 214 54 76 365 291 255 215 240 69 21 18

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download