Camlok

Üldine: The clamps generate more grip to heavier load. Used in pairs the CH Clamp is designed for loading process machines and to lift and transport sheet steel plate in the horizontal position. A single pair of clamps supported from a 2 legged chain sling (maximum included angle 90º) are used to lift short lengths of plates. Long lengths of plate must be lifted using 2 pairs of clamps supported from a lifting beam.
Testkoormus: 2 x WLL.

 

Vali allolevast tabelist sobivaim rida, seejärel lisa toode päringule
Tootekood Kood WLL
tonn
Lõug Kaal
kg/pair
CAD
06.15CH01 CH-1 1 5-32 8
06.15CH02/S CH-2/S 2 5-32 11
06.15CH02/L CH-2/L 2 20-50 12
06.15CH04/S CH-4/S 4 5-50 17
06.15CH04/L CH-4/L 4 50-100 23
06.15CH06/S CH-6/S 6 5-75 46
06.15CH06/L CH-6/L 6 50-125 56
06.15CH08/S CH-8/S 8 5-75 53
06.15CH08/L CH-8/L 8 50-125 60
06.15CH10/S CH-10/S 10 5-100 95
06.15CH10/L CH-10/L 10 50-150 108

CAD fail

CAD faili alla laadimiseks palun valige vastav toode ülalolevast tabelist ning vajutage "Laadi CAD" nupule. Peale CAD faili laadimist saate selle alla laadida.

Laadi CAD
Laadi alla