Powertex

Wire rope grip type Powertex is approved for lifting if assembly is carried out according to instruction manual.

Note: The wire rope grip to be used with 6 and 8 strand steel wire ropes with steel or fibre core with tensile strength up to 1960 N/mm2. Correctly mounted the assembling will stand 80% of the rope's minimum breaking load (MBL).

  • Features: PG-4, 6, 8, 10 are drop forged. PG-12, 16, 20, 25, 35 are casted.
  • Finish: Galvanized.
  • Warning: Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope grips
Select a row from the table below, then click the add to quote button
Part Code Code Thread No. of clamps when lifting* Torque
Nm
Wire Ø
mm
Weight
kg/100pc
CAD
10.17PWRG04 PG-4 M5 3 5 3-4 5
10.17PWRG06 PG-6 M6 3 9 5-6 10
10.17PWRG08 PG-8 M6 3 9 7-8 14
10.17PWRG10 PG-10 M8 3 23 9-10 25
10.17PWRG12 PG-12 M8 3 23 10-12,5 32
10.17PWRG16 PG-16 M10 3 45 13-16,5 58
10.17PWRG20 PG-20 M12 3 75 17-20 95
10.17PWRG25 PG-25 M16 3 190 21-25 164
10.17PWRG35 PG-35 M16 3 190 26-35 370

* Minimum number of grips required to fulfill 80% of the rope MBL can vary, and must be according to local regulations (see local language).

Download CAD

Description

Get CAD
скачать