Unlike braided fibre ropes, the construction of an Extreema® roundsling is based on parallel laid fiber technology that make up the core.

The core of an Extreema® roundsling is always made of 100% high performance fibers, such as Dyneema® or general HMPE. This makes the slings up to 15 times stronger than steel on a weight for weight basis. Comparison between equal slings in HMPE/Dyneema® and wire rope sling will give you a weight reduction up to 80% compared to wire rope.

A jacket, sleeve or cover mainly serves to keep the core yarn strands together. It is important to consider the circumstances of the lifting job in choosing the right sleeve for your sling. The right cover protects the core material from getting damaged in an early stage but in addition appropriate supplementary protections (on the bearing points, sharp objects etc.) 

Dyneema® advantages:

  • The slings are light weight and easy to handle which makes them extreamly ergonomic for heavy lifting.
  • Less than 1% stretch at WLL, therefor suitable for calculated lifts.
  • Small diameter due to stronger material than regular polyester roundslings.
  • D:d down to 1:1 for roundslings up to 150T, above this D:d=1:1,5
  • Resistant against chemicals, but do always inform us if chemicals are involved
  • Does not absorb water, Extreema® slings float on water
  • Longer life cycle compared to polyester slings
  • No rust or corrosion like on steel wire ropes
  • Material: 100% Dyneema® or general HMPE
  • Marking: According to standard, CE-marked
  • Temperature range: -50°C up to +70°C
  • Standard: EN 1492-2
    except material
  • Safety factor: 7:1
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
CAD
12.20EXT0030XXX 3
12.20EXT0050XXX 5
12.20EXT0100XXX 10
12.20EXT0120XXX 12
12.20EXT0150XXX 15
12.20EXT0200XXX 20
12.20EXT0250XXX 25
12.20EXT0300XXX 30
12.20EXT0400XXX 40
12.20EXT0500XXX 50
12.20EXT0750XXX 75
12.20EXT1000XXX 100
12.20EXT1250XXX 125
12.20EXT1500XXX 150
12.20EXT2000XXX 200
XXX = last 3 digits in article number indicates the effective working length in m. (EWL). Example XXX (020) = 2 m.
All data in this table is indicative.
MBL 2500T straight pull, MBL 5000T in basket hitch (U-lift)
 
 
 
 
 

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download
Working load limit (WLL) in tons
 
 
 
 

U-lift

Choke hitch

U-lift

Basket hitch 0-45 degrees

Basket hitch 0-45 degrees

Straight pull Choke hitch Basket hitch
 
 
 
 
0°-45°
45°-60°
1
0,8
2
1,4
1
2
1,6
4
2,8
2
3
2,4
6
4,2
3
4
3,2
8
5,6
4
5
4
10
7
5
6
4,8
12
8,4
6
8
6,4
16
11,2
8
10
8
20
14
10
15
12
30
21
15
20
16
40
28
20
25
20
50
35
25
30
24
60
42
30
40
32
80
56
40
50
40
100
70
50
60
48
120
84
60
80
64
160
112
80
100
80
200
140
100
Available with an MBL up to 4000T (WLL=500T SF5) and lengths up to 65m.